End Locks

B&D BND Roller Door Locking Bar Guides Retainer Clips 51039Sold as a PAIRClip over the wear tape on the back of the door (which is usually riveted or stapled to the door) and then the lock bars slide through them..

B&D garage door Pair of Lock Rod Bars  Fits both insulated and uninsulated roller shutter doors Connects to the door lock bars, and these bars slide across to lock and unlock the door when the lock is turned They are silver (as pictured) and come in 5 different lengths - plea..

Replacement lock barrel to suit Garage Door Systems roller door barrel & 2 keys Fits the complete lock shown in the various images (for identification purposes only). Can also be identified by having a PAT number on the back of the lock mechanism.  You are buying the lock barrel &..

New Garage Door Systems GDS type roller door handle & lock 180mm (7") faceplate version to fit newer model doors. Back lock body mechanism is approx 105mm x 40mm Includes Metal handle moulding, full rear lock & mechanism,  Please see our related products area below for th..

New Garage Door Systems GDS type roller door handle & lock 250mm (9.5") version to fit older model doors Includes Metal handle moulding, full rear lock & mechanism,  Please see our related products area below for the same lock but which has 2 x shorter bars rather than 1 ..

New Garage Door Systems GDS type roller door handle & lock 250mm (9.5") version to fit older model doors Includes Metal handle moulding, full rear lock & mechanism,  Please see our related products area below for the same lock but which has 1 x long & 1 x short bar ra..

Gliderol lock bar guides - Pair Made from plastic, these attach at the sides of the door to guide the lock bars on opening and closingPlease see images for information purposes in situSold as a pair, come complete with rivetsFits both insulated and uninsulated roller shutter doorsPlease see our..

Genuine Gliderol Pair of Lock Rod Bars  Fits both insulated and uninsulated roller shutter doors Connects to the door lock bars, and these bars slide across to lock and unlock the door when the lock is turned They are silver (as pictured) and come in 5 different lengths - please ..

Replacement lock barrel to suit GLIDEROL Garage Roller Shutter Door Locks - 5" NEW STYLE version. Fits the complete lock shown in the images (for identification purposes only). You are buying the lock barrel & 2 keys NOT the complete lock Barrel length 23mmBarrel Diameter 15mmWill..

Gliderol roller door handle & lock Faceplate is 143mm x 44mm (5.5") version to fit newer model doors, screw centres 78mmPlease note, if your original lock had the silver metal back mechanism, you can fit this version but you will need to cut down the 2 plastic screw spigots of the face plat..

Replacement lock mechanism to suit GLIDEROL Garage Roller Door Lock - New style 5.5" lock (fascia plate size)  Includes full rear lock mechanism, 2 keys and fixings as shown in the picture  Please see our related products area below if you need the full lock with faceplate, ..

New Gliderol type roller door handle & lock 250mm (9.5") version to fit older model doors Includes Metal handle moulding, full rear lock & mechanism,  Please see our website for the shorter 140mm (5.5") version for newer door models Comes complete with 2 Keys an..

Replacement lock barrel to suit Gliderol roller door barrel & 2 keys Fits the complete lock shown in the images (for identification purposes only). Can also be identified by having a PAT number on the back of the lock mechanism.  You are buying the lock barrel & 2 keys NO..

Brand New replacement Gliderol roller door Faceplate handle Backplate is 143mm x 44mm (5.5") version to fit newer model doors, screw centres 78mm Hole size is 19mm to fit older and newer locks Please see our website for the complete lock and longer (9.5") version for older d..

Roller shutter door handle & lock which will fit the Henderson Roller Shutter Doors which have this lock fitted. Please note this is Gliderol branded but is the same lock. They are no longer made with the Henderson Name on Backplate is 143mm x 44mm (5") version to fit newer model doors, scr..

PAIR of End Locks made by AlutechAre a PUSH-FITTo fit 37mm high slat (lath) roller shutter garage doors  Made from Nylon Fitted to most standard shutters Please see our related products area below for the larger 55mm and 77mm (3") end locks..

PAIR of End Locks made by AlutechAre a PUSH-FITTo fit 41mm high slat (lath) roller shutter garage doors (widest part 45mm, bit that pushes into the slat is 35mm) Made from Nylon Fitted to most standard shutters Please see our related products area below for the larger 55mm and 77..

PAIR of End Locks made by AlutechAre a PUSH-FITTo fit 55mm high slat (lath) roller shutter garage doors  Made from Nylon Fitted to most standard shutters Please see our related products area below for the larger 77mm (3") end locks..

PAIR of End Locks made by AlutechAre a PUSH-FITTo fit 77mm high slat (lath) roller shutter garage doors  Made from Nylon Fitted to most standard shutters Please see our related products area below for the smaller 55mm end locks..

PAIR of reversible End LocksAre held in place with 2 rivetsTo fit 2" high slat (lath) roller shutter garage doors (Overall length of end lock is 63mm)Hole centres are 13mmFlat part with the holes in is 25mm x 18mm Made from Nylon Fitted to many commercial shutters Please see our ..

PAIR of End Locks complete with 4 rivetsEach end lock is secured with 2 rivetsTo fit 77mm high curved slat (lath) roller shutter garage doors  Made from Nylon Fitted to most standard roller shutter industrial doors Please see our related products area below for the pressed s..

PAIR of End Locks complete with 4 rivetsEach end lock is secured with 2 rivetsTo fit 77mm high curved slat (lath) roller shutter garage doors  Made from Pressed Steel Fitted to most standard roller shutter industrial doors Please see our related products area below for the n..

Replacement Roller Shutter Door Dummy (bobbin) End shaft assembly which fits 70mm Octagonal tubes (also known as barrels and drums). See our related products area below if you need the 60mm version.Has a square 18mm shaft and fits into a safety brake.Comes complete with the bridle (cradle)Fits many ..

Replacement Roller Shutter Door Dummy (bobbin) End shaft assembly which fits 60mm Octagonal tubes (also known as barrels and drums)Fits many different roller shutters and domestic garage door shutter.Is made from plastic with a metal shaft - please see our related products for the 70mm version.Has a..

Replacement Roller Shutter Door Dummy (bobbin) End shaft assembly which fits 70mm Octagonal tubes (also known as barrels and drums)Fits many different roller shutters and domestic garage door shutter.Is made from plastic with a metal shaft - please see our related products for the 60mm version.Has a..

Replacement Roller Shutter Door Dummy (bobbin) End shaft assembly with bearing and plate, which fits 60mm Octagonal tubes (also known as barrels and drums)Fits many different roller shutters and domestic garage door shutter.Is made from plastic with a metal shaft - please see our related products fo..

Replacement Roller Shutter Door Dummy (bobbin) End shaft assembly with bearing and plate, which fits 70mm Octagonal tubes (also known as barrels and drums)Fits many different roller shutters and domestic garage door shutter.Is made from plastic with a metal shaft - please see our related products fo..

Crank Winding Handle for Roller Shutter garage doors, blinds, canopy installations and awnings etcThe manual crank handle provides manual override operation in the event of a power cut or motor failure etc and you should have one of these incase access is requiredUsed in conjunction with the Motor w..

Replacement Roller Shutter Door Dummy (bobbin) End which fits 60mm Octagonal tubes (also known as barrels and drums)Is made from metal - please see our related products for the plastic version.  Also, if your version is currently plastic, you can fit a metal one in its place which is more hard-..

Replacement Roller Shutter Door Dummy (bobbin) End which fits 70mm Octagonal tubes (also known as barrels and drums)Is made from metal - please see our related products for the plastic version.  Also, if your version is currently plastic, you can fit a metal one in its place which is more hard-..

Replacement Roller Shutter Door Dummy (bobbin) End Cap assembly which fits 60mm Octagonal tubes (also known as barrels and drums)Fits many different roller shutters and domestic garage door shutters.Is made from plastic and comes complete with a 28mm bearing - please see our related products for the..

Roller Shutter Key Switch Locking Box - With Back (see our related product area below for the same box but without the back in which is useful to retro-fit to an existing key switch meaning you do not have to unwire the switch)Heavy Duty metal industrial lockable box which has a nickel plating finis..

Roller Shutter Key Switch Locking Box - Without Back (see our related product area below for the same box but with the back)Heavy Duty metal industrial lockable box which has a light painted silver finish.The Key Switch Locking Box is a security box suitable for key switch hinge protection.It is sec..

Replacement Roller Shutter Ball Bearing End Plate Fits onto the end of the drum which usually has the dummy end and the 42mm bearing slots inside it (see our related products area below for the bearing)This product is for the plate only as shown  If you require the bearing, or the dummy en..

Replacement Steel Line roller door handle & lockPLEASE NOTE; STEEL LINE NO LONGER SUPPLY THESE LOCKS WITH THE STEEL LINE NAME ON - THE LOCKS NOW ARE AS PER THE 2ND PICTURE WITH THE SILVER OUTLINE ONLY - NO STEEL LINE NAME.The Main image is for identification purposes only. 250mm (10") versi..

Brand New Cardale Steel Line type replacement lock Comes with lock barrel and black face plate fascia with curved edges Lock length 103mm  Lock height 40mm Screw Centre 75mm Comes complete with 2 Keys and fixing bolts..

Brand New Cardale Steel Line type replacement lock Comes with lock barrel and silver face plate fascia Lock length 103mm  Lock height 40mm Screw Centre 75mm Comes complete with 2 Keys and fixing bolts..

Replacement Steel Line roller door barrel & 2 keysPLEASE NOTE, IF YOUR STEEL LINE LOCK DOES NOT HAVE A PAT: NUMBER ON THE BACK MECHANISM, THIS BARREL WILL NOT FIT YOUR EXISTING LOCK BODY AND YOU WILL NEED TO BUY A COMPLETE NEW LOCK - SEE OUR RELATED PRODUCTS AREA BELOW Fits the complete loc..

Steel Line lock bar guides - Pair Made from plastic, these attach at the sides of the door to guide the lock bars on opening and closingPlease see images for information purposes in situSold as a pair, come complete with rivetsFits both insulated and uninsulated roller shutter doorsPlease see o..

Steel Line garage door Pair of Lock Rod Bars  Fits both insulated and uninsulated roller shutter doors Connects to the door lock bars, and these bars slide across to lock and unlock the door when the lock is turned They are silver (as pictured) and come in 5 different lengths - p..

Replacement Roller Shutter Door Dummy (bobbin) Axle Cap assembly which fits 60mm Octagonal tubes (also known as barrels and drums) for SWS Compact (55mm) roller shutter garage doors.Also fits many different roller shutters and domestic garage door shutters.The SWS design of this product allows you t..